Thesis
Temporarily alloying titanium to facilitate friction stir welding
Washington State University
Master of Science (MS), Washington State University
2009
Handle:
https://hdl.handle.net/2376/102456
Abstract
While historically hydrogen has been considered an impurity in titanium, when used as a temporary alloying agent it promotes beneficial changes to material properties that increase the hot-workability of the metal. This technique known as thermohydrogen processing was used to temporarily alloy hydrogen with commercially pure titanium sheet as a means of facilitating the friction stir welding process. Specific alloying parameters were developed to increase the overall hydrogen content of the titanium sheet ranging from commercially pure to 30 atomic percent. Each sheet was evaluated to determine the effect of the hydrogen content on process loads and tool deformation during the plunge phase of the friction stir welding process. Two materials, H-13 tool steel and pure tungsten, were used to fabricate friction stir welding tools that were plunged into each of the thermohydrogen processed titanium sheets. Tool wear was characterized and variations in machine loads were quantified for each tool material and weld metal combination. Thermohydrogen processing was shown to beneficially lower plunge forces and stabilize machine torques at specific hydrogen concentrations. The resulting effects of hydrogen addition to titanium metal undergoing the friction stir welding process are compared with modifications in titanium properties documented in modern literature. Such comparative analysis is used to explain the variance in resulting process loads as a function of the initial hydrogen concentration of the titanium.
Metrics
2 File views/ downloads
12 Record Views
Details
- Title
- Temporarily alloying titanium to facilitate friction stir welding
- Creators
- Yuri Hovanski
- Contributors
- William C. Kinsel (Degree Supervisor)
- Awarding Institution
- Washington State University
- Academic Unit
- Mechanical and Materials Engineering, School of
- Theses and Dissertations
- Master of Science (MS), Washington State University
- Publisher
- Washington State University; Pullman, Wash. :
- Identifiers
- 99900525169101842
- Language
- English
- Resource Type
- Thesis