Journal article
Densification and Properties of 420 Stainless Steel Produced by Three-Dimensional Printing With Addition of Si3N4 Powder
Journal of manufacturing science and engineering, Vol.131(6), pp.061001 (7)-061001 (7)
12/01/2009
Handle:
https://hdl.handle.net/2376/116651
Abstract
This study is aimed to investigate the effect of adding Si3N4 on the three-dimensional printing (3DP) processed 420 stainless steel (SS). The final density, dimensional changes, and mechanical properties have been studied for the samples prepared under a series of sintering conditions. The contents of Si3N4 powder ranging between 0 wt % and 15 wt % and the sintering temperature were varied in the experiments in order to understand the dependence of densification kinetics and changes in properties on these process parameters. The experiments provide the evidence that the addition of Si3N4 can improve the densification kinetics of 420 SS significantly. The 420 SS samples produced by 3DP with 12.5 wt % Si3N4 sintered at 1225C for 6 h yielded 95% relative density, 190 GPa Young's modulus, and 500 Knoop microhardness without any major sample shape distortion. The results are promising in that the 3DP process can be used to yield the prototype almost equivalent to a real part with a full mechanical capacity.
Metrics
9 Record Views
Details
- Title
- Densification and Properties of 420 Stainless Steel Produced by Three-Dimensional Printing With Addition of Si3N4 Powder
- Creators
- Li SunYong-Ha KimDave KimPatrick Kwon
- Publication Details
- Journal of manufacturing science and engineering, Vol.131(6), pp.061001 (7)-061001 (7)
- Academic Unit
- Engineering and Computer Science (VANC), School of
- Identifiers
- 99900548251901842
- Language
- English
- Resource Type
- Journal article