Journal article
Effect of Reactive Graphitic Nanofibers (r-GNFs) on Tensile Behavior of UHMWPE Fiber/Nano-Epoxy Bundle Composites
Materials and manufacturing processes, Vol.23(1), pp.102-110
12/10/2007
Handle:
https://hdl.handle.net/2376/117572
Abstract
Ultra-high molecular weight polyethylene (UHMWPE) fibers have good mechanical and physical properties and effective radiation shielding functions, which are significant for aerospace structures. In our previous work, nano-epoxy matrices were developed based on addition of reactive graphitic nanofibers (r-GNFs) in a diluent to form a blend. It is found that improved wettability and enhanced adhesion of the matrices to UHMWPE fibers can be obtained. In this study, a series of nano-epoxy matrices with different concentrations of r-GNFs (up to 0.8 wt%) and different weight ratios of r-GNFs to a reactive diluent (1:4, 1:6, 1:7, and 1:9) were prepared. Composite bundle specimens of UHMWPE fiber/nano-epoxy were fabricated and their tensile behavior was investigated. All load-displacement curves of the UHMWPE/nano-matrix bundle composites under tensile loading showed three regions corresponding to the three deformation and failure stages of the materials: 1) elastic deformation stage, 2) plateau stage, and 3) UHMWPE fiber failure stage. The nano-epoxy with 0.3 wt% of r-GNFs and with 1:6 ratio of r-GNFs to the diluent proved to be the best matrix for UHMWPE fiber composites with enhanced tensile properties. For the resulting composite, the load level and consumed energy in the plateau stage were increased by 8% and 30% over the UHMWPE fiber/pure-epoxy specimens, respectively. This UHMWPE fiber composite with the optimized nano-epoxy matrix also possesses the highest initial stiffness and ultimate tensile strength among all the resulting UHMWPE fiber composites. These results laid a foundation for us to fabricate UHMWPE fiber reinforced composite laminates in the near future.
Metrics
5 Record Views
Details
- Title
- Effect of Reactive Graphitic Nanofibers (r-GNFs) on Tensile Behavior of UHMWPE Fiber/Nano-Epoxy Bundle Composites
- Creators
- S Jana - School of Mechanical and Materials Engineering , Washington State UniversityA Zhamu - School of Mechanical and Materials Engineering , Washington State UniversityW.-H Zhong - School of Mechanical and Materials Engineering , Washington State UniversityY. X Gan - Department of Mechanical Engineering , North Dakota State UniversityJ. J Stone - School of Mechanical and Materials Engineering , Washington State University
- Publication Details
- Materials and manufacturing processes, Vol.23(1), pp.102-110
- Academic Unit
- Mechanical and Materials Engineering, School of
- Publisher
- Taylor & Francis Group
- Identifiers
- 99900547977101842
- Language
- English
- Resource Type
- Journal article